VEVOR D520S-A - Parameter Ranges and Time Setting; Parameter Variable Ranges; Time Setting Configuration

- 9 -
variable range is from “5~15” minutes, press”UP” and “DOW” can change
the setting volume)
Continue pressing “ ” key for two times, every time operation can change
the icon display on the window. And when each icon appears,by pressing
“ ”key for one time to change the setting you want.(Volume can be
changed by pressing “UP” and “DOWN”)
Icon
Implication
Variable Range
P1
Periodic Restarting Time Seeting
Range：5~15 minutes
P2
Stop Delay of Beater Motor
Range:5~15 seconds
P3
No Specific Meaning
Range:5~15 seconds
P4
Hopper Pre-cooling Temperature
Seeting
Range:10—80，indicates
1.0℃~8.0℃
P5
Cylinder Temperature Setting
P6
Cleaning Frequency
Range:2—14，indicates 2~14
days
P7
Lack Mix Alarming Time Setting
Range:0—10 mins，”0”-
Non-Stop
Press “ ” , the machine will enter circulatory volume setting. Without any
operation in ten seconds, setting volumes will be automatically saved and
back to the standby mode.
Time Setting
In standby mode, press the "AUTO" and "WASH" buttons for 5 seconds,
the window shows "F1 01", then you can click the “UP” or “DOWN” key to
adjust the back number. Press “ ” key, the window shows “F2 12”, by
such analogy until " F7 30".
Note: F1 says mark symbol, 01
、
02
、
03……30says actual value.
F1 -- week (00 - Sunday) F2 -- year F3 – month F4 -- date