To Next PageTo Next PageWhat to do if my VEVOR D520S-A does not run?
If your VEVOR Ice Cream Maker isn't running, there are a few potential causes. First, ensure the machine is properly plugged into the wall receptacle. If it is, check if the short-circuiting switch is open; if so, restart it after repositioning. Finally, examine the circuit and remove any issues that might be causing it to trip.
Why VEVOR D520S-A doesn't run in clean position?
If your VEVOR Ice Cream Maker doesn't run in the clean position, it could be due to a few reasons. Check if the connecting wire is unfastened and fasten it. Another possibility is that the beater motor is broken, in which case you should repair or replace it. Also, the mini circuit breaker might be broken, so find and solve the problem, then reposition it.
What to do if VEVOR D520S-A Ice Cream Maker in auto position does not run?
If your VEVOR Ice Cream Maker does not run in auto position, it might be because the wire of the function switch is unfastened; in this case, you should check and fasten the wire. Alternatively, there might be a problem with the control panel, so consider changing the control panel.
General| Brand | VEVOR |
|---|---|
| Model | D520S-A |
| Category | Ice Cream Maker |
| Language | English |
User manual reading, FCC compliance, and EU directive for waste collection.
Guidelines for safe appliance handling, cord placement, ventilation, and storage of substances.
Information on flammable refrigerant, foaming agent, and fire risk warning symbols.
Details FCC compliance, operational conditions, and user measures to correct interference.
Identification of machine parts with corresponding numbers for assembly and maintenance.
Steps for unpacking the machine, inspecting for damage, and checking accessories.
Guidance on selecting installation location and connecting the power supply safely.
Steps for testing the machine's functions like 'Wash' and 'Auto' modes.
Detailed steps for cleaning and sterilizing the machine using detergent and water.
Critical notices regarding sterilizing solution temperature and water removal to prevent damage.
Explanation of the control panel keys (Set, Adjust, Wash, Auto, Standby) and the display screen.
Instructions on adjusting ice cream stiffness and setting machine parameters (P1-P7).
Details the variable ranges for each parameter (P1-P7) such as time, temperature, and frequency.
Instructions on how to set time-related parameters (F1-F7) like week, year, month, date, hours, minutes, seconds.
Explains the functions of the 'Wash', 'Standby', and 'Auto' keys and their operational controls.
Describes protection functions for sensors and error indicators like RL, RH, CL.
Explains various error indicators, alarms, and their meanings related to machine status.
Instructions on cleaning and sanitizing the machine before preparing ice cream.
Steps for preparing the mixer, making ice cream, setting hardness, and dispensing.
Instructions for daily cleaning after use, including dispensing remaining ice cream and sanitizing.
Steps to exhaust slurry, prepare and use disinfecting solution for cleaning.
Instructions for disassembling and cleaning specific parts like the dispenser door and beater.
Detailed list of components for the dispenser door assembly (Fig. 3 A).
Detailed list of components for piston, beater, and dispensing valve (Fig. 3 B).
Guidance on lubricating components with vaseline before reassembly for extended life.
Instructions for cleaning the machine cabinet and its condenser periodically.
Instructions for adjusting the belt tension due to elongation for proper machine operation.
Common problems like the machine not running and their probable causes and remedies.
Addresses issues with the compressor not running and the machine not freezing down.
Solutions for unstable relays, dispensing problems, and incorrect mix proportion.
Addresses problems like the product being too soft and various types of leakage.
Solutions for Nixie tube displays showing "NL" (belt skid) or "---" (proximity switch).
Information regarding the location of the schematic wiring diagram and technology parameters.
