for the health of customers.
1)Press " " key to exhaust all the remaining slurry in the beverage
containers and refrigeration cylinder, then click " " key ,the machine will
stop;
2)Take the right amount of food detergents, make up disinfecting solution
according to it’s instruction with warm water, then put the solution into each
bucket;
3)Press the " " key, after the machine stirring about 5 minutes, discharge
the disinfecting solution, followed by washing with water 2~3 times, then
stop the machine;
4)Turn off the power, take apart and wash the parts.
a、Unscrew the four fastening screws in front of the dispenser door, remove
the dispenser door;
b、Remove the components as follow: pin of handle, handle, piston, O-ring
for piston and O-ring for dispenser door from the dispenser door;
c、Draw the beater from the refrigeration tank, then remove the gasket for
beater.
Fig.3 A
To Next Page
Loading...
