Fittings of a machine：
1.Diamond millstone
2.Tray
3.Adaptor
4.Cooling water pipes
5.Screw
6.Three different gem fixing rod
GENERAL SAFETY RULES
WARNING: Do not attempt to operate the machine until you have read thoroughly
and understood completely all instructions, rules, etc. contained in this manual.
Failure to comply may result in accidents involving fire, electric shock, or serious
personal injury. Keep thisowner's manual and review frequently for continuous
safe operation.
1. Know your machine. For your own safety, read the owner's manual carefully.
Learn its application and limitations, as well as specific potential hazards pertinent
to this machine.
2. Make sure all tools are properly earthed.
3. Keep guards in place and in working order. If a guard must be removed for
maintenance or cleaning,make sure it is properly replaced before using the
machine again.
4. Keep your work area clean. Cluttered areas and workbenches increase the
chance of an accident.
5. Do not use in dangerous environments. Do not use power tools in damp or wet
locations, or expose them to rain. Keep work areas well illuminated.
6. Keep children away. All visitors should be kept a safe distance from the work
area.
To Next Page
Loading...
