melt and fuse permanently with the radiant glass
surface.
CLEANING
IMPORTANT: If the radiant glass surface breaks or you notice cracks in it,
disconnect the equipment. Call your Repair Service Technician.
Clean the radiant glass surface frequently,
when it is cool. Never use abrasive
products or pads. Clean with a damp cloth
and soapy water.
Once a week, clean thoroughly with
specific products that preserve and protect
radiant cooktops hobs. Scrape off stuck on
stuck dirt with a scraper
If sugar (or sugary matter) or plastic is
accidentally burnt on the cooktop, remove
at once with the scraper while still hot.
Otherwise it may leave a permanent mark.
Do not use the cooktop as a work surface.
To Next Page
Loading...
