EasyManua.ls Logo

VEVOR LT4-77 - Installation

VEVOR LT4-77
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
ceramic, earthenware, or other glazed pots and pans are suitable for
range-top service due to the sudden change in temperature, which may
result in breakage.
•Do not soak removable heating elements. Heating elements should never
be immersed in water.
•Do not cook on a broken cooktop. Contact a qualified technician
immediately.
•Clean cooktop with caution. Be careful to avoid steam burns if a wet
sponge or cloth is used to wipe spills on a hot cooking area. Some cleaners
can produce noxious fumes if applied to a hot surface.
SAVE THESE INSTRUCTIONS
INSTALLATION
1. Cut a hole in the worktop of the dimension shown in the diagram below A
minimum of 50mm space should be left around the hole The worktop
should be at least 30mm thick and made of heat resistant material.

Related product manuals