Technical parameters
Safety Precautions
Safety & Warning
Warning:
1. Not exceed 80% of claimed range of manifolds when using.
2. Un-proper operation may lead to leakage or personal injury.
3. Please read manual & operation instruction of manifold or equipment.
4. The refrigeration gauge has been calibrated at the factory; however,
due to handling and shipping it may be lightly out of adjustment.To adjust,
unscrew and firmly hold center screw fixed with screwdriver and with
thumb and forefinger gripping pointer near center,gently turn pointer to
zero. Repeat carefully if not on zero.
IMPORTANT:
1. Gauges are available for most refrigerants in°F.
2. Please read before putting new equipment into operation.The
Compound Rubber forms seals around the valve stem.Tighten the valve
nut a quater to half turn to take up the set before commencing operation
and retighten as necessary to keep the seal tight.
NOTE: Check equipment manufactures catalogue or instruction sheets
2.1（Including all accessories）
To Next Page
Loading...
Need help?
General
