VEVOR YT60234 User Manual (English)

Questions and Answers:

A
Anthony PrinceJul 29, 2025
What to do if the wireless sensor on my VEVOR YT60234 Weather Station is not communicating?
- R
  Rebecca AcostaJul 29, 2025
  If your VEVOR Weather Station's wireless sensor isn't communicating, it might need a reset. Use an open-ended paperclip to press the RESET button for 3 seconds to display the voltage. If the LED doesn't flash every 20 seconds, remove the batteries, cover the solar panel to drain the voltage, wait 5 minutes, then reinsert the batteries. You can also try powering down the weather station by removing both the DC power and batteries, waiting 30 seconds, and then reconnecting them.
C
catherinewhitakerAug 8, 2025
Why don't the indoor and outdoor temperatures agree on my VEVOR Weather Station?
- P
  Patrick HowardAug 9, 2025
  If the indoor and outdoor temperatures on your VEVOR Weather Station don't match, give the wireless sensors an hour to stabilize due to signal filtering. Also, the sensor accuracy is ±1?(±2?). You can use the calibration feature to match the indoor and outdoor temperature to a known source.
B
brooksandreaAug 18, 2025
How to fix the LED if it will not flash every 20 seconds on my VEVOR YT60234?
- J
  Jody ReidAug 19, 2025
  If the LED on your VEVOR Weather Station's wireless sensor won't flash every 20 seconds, remove the batteries and wait 5 minutes while covering the solar panel to drain the voltage. Put batteries back in and resync the weather station and resync the weather station with the wireless sensor about 3m (10 feet) away.

VEVOR YT60234 Specifications

General

Model	YT60234
Type	Wireless Weather Station
Power (Outdoor Sensor)	2 x AA Batteries (Not Included)
Transmission Range	100 meters (328 feet) in open space
Display	LCD with backlight
Features	Temperature, Humidity
Temperature Range (Indoor)	0°C to 50°C (32°F to 122°F)
Humidity Range	20% to 95%