Vex Robotics IQ Clutch - Controller Operation and Configuration; Controller Layout and Functions; Driver Control Program Setup

47
Configure
Control 2 Joystick
DriveTurn Normal
Drive FWD Reverse
Motor 4 Normal
Motor 5 Normal
Select Exit
Left Drive
Side
The Driver Control program must be in 2
Joystick mode to drive Stretch IQ.
Set Drive FWD to Reverse. Set DriveTurn
to Normal.
Right Drive
Side
Close Claw
Arm Up & Down
Open Claw
RL
Configure
Control 2 Joystick
DriveTurn Normal
Drive FWD Reverse
Motor 4 Normal
Motor 5 Normal
Select Exit
Configure
Control 2 Joystick
DriveTurn Normal
Drive FWD Reverse
Motor 4 Normal
Motor 5 Normal
Select Exit