pairing state.
3,BHM-79 will be displayed in the list of available
devices on radios, select BHM-79 and bind it
5,Pair On The APP
1,Press and hold the <P3> buon to turn on the
microphone to be paired, and then double-click the
<P3> buon. The indicator light of the microphone
flashes red and blue alternately, and a beep sounds
to indicate that it has entered the pairing state.
2,Open the APP to enter the sengs page, click
Connecon Management, and turn on scanning.
3,Find the BHM-79 in the scanned list and click
BHM-79 to pair.
If pairing is unsuccessful, please repeat the above
steps, or the speaker microphone has been mistakenly
paired to surrounding radios, please turn off other
radio and pair with this device again.
When the pairing is successful, <Peripheral Pairing>
will automacally turn of the pairing state. Observe
whether the headset icon is displayed on the display of
the radio, or press the PTT buon.
To Next Page
Loading...