VAB
VABVAB
VAB-
--
-820 HMI Solution Pack
820 HMI Solution Pack820 HMI Solution Pack
820 HMI Solution Pack V
V V
V2.0
2.02.0
2.0 Development Guide
Development Guide Development Guide
Development Guide
3
2.
2.2.
2. Setup Building Environment
Setup Building Environment Setup Building Environment
Setup Building Environment
This chapter will guide users through setting up the developing environment.
All the instructions in this guide are for Ubuntu 12.04 (32 Bit or 64 Bit). Please
have the Ubuntu installed in the PC/NB in advance.
To get the Yocto Project expected behavior in a Linux Host Machine, the
packages and utilities described below must be installed. An important
consideration is hard disk space required in the host machine. The
recommended space is 120 GB at least.
2.1. Configure Ubuntu
2.1.1. Install the Host Packages
The following packages are installed to support Yocto development
environment and presented in a bash script that can be cut and pasted into the
environment for execution:
#/bin/bash
# Install LTIB dependant packages
sudo apt-get install wget git-core unzip texinfo libsdl1.2-dev gawk
diffstat build-essential chrpath
sudo apt-get install sed cvs subversion coreutils texi2html docbook-
utils python-pysqlite2 help2man make gcc g++ desktop-file-utils
libgl1-mesa-dev libglu1-mesa-dev mercurial autoconf automake groff
curl lzop asciidoc xterm
To Next Page
Loading...
Need help?
General
