2021 RSS Manual all models.doc. Page 3 // 02/12/21
CAUTION
1. Keep hands and fingers, loose hanging clothing, jewelry, and access badges on lanyards
well clear of fan wheel. Clear a 6' (2m) diameter area of dust and loose paper objects since
air flows out of the fan wheel perimeter onto the room floor during normal RSS operation.
2. Plug into appropriate power source (check specific unit specifications). The fan will start
immediately. Extension cord length vs. minimum wire size: 100'- #16; 200'-#14 (115V).
3. The RSS motor is thermally protected (TP): If fan wheel ever fails to turn after electric
power is applied, DISCONNECT electric power before investigating. Operation may be
continuous for ambient air temperatures below 40º C. Run acoustical tests according to your
program requirements. Nominal Sound Power data in 1/3-octave and octave bands is found on
the next page. Check your current calibration report for data of your specific unit.
4. Disconnect the RSS from electrical power when not in use.
5. Place RSS in its shipping container when not in use for extended periods. (Storage on its
side or in the RSS case will unload and prevent distortion of the resilient feet during long-term
storage).
To Next Page
Loading...