Viatom BP2 - Maintenance and Cleaning; Maintenance

13
CMRR
>60 dB
Center Frequency
50/60 Hz
Linearity and dynamic range
10mV (Peak-to-valley)
Frequency response
0.67 to 40 Hz
Gain error (Max.)
±10%
HR measurement range
30 to 250 /min
Accuracy
±
2 /min or
±
2%, whichever is greater.
Memory
Capacity
BP2: up to 100 readings for Blood Pressure data
+ 10 records for ECG data.
BP2A: up to 100 readings for Blood Pressure data
Bluetooth RF
Frequency range
2.402-2.480 GHz
GFSK Modulation
Adaptive Frequency Hopping (AFH)
Wireless Quality of Service
(QoS)
Transmission Distance: 1.5m
Transmission Time:
≤
0.5s for one Blood Pressure reading
≤10s for one ECG record
Data integrity: 100%
Network topology
Point-to-Point
Band width
1Mbps
Durable period
Expected service life
3 years
7. Maintenance and Cleaning
7.1 Maintenance
To protect your product from damage, please observe the following:
• Store the product and the components in a clean, safe location.
•
Do not wash the product and any components or immerse them in water.
• Do not disassemble or attempt to repair the product or components.
•
Do not expose the product to extreme temperatures, humidity, dust or direct sunlight.
• The cuff contains a sensitive air-tight bubble. Handle this carefully and avoid all types of straining
through twisting or buckling.
•
Clean the product with a soft, dry cloth. Do not use petrol, thinners or similar solvent. Spots on the
cuff can be removed carefully with a damp cloth and soapsuds. The cuff must not be washed!