Why can't I get blood pressure measured results on my Viatom Blood Pressure Monitor?
If you cannot get blood pressure measured results, it may be due to arm movement or unexpected bulb squeeze during measurement. Keep your arm still and avoid squeezing the bulb while the device is deflating and measuring. Another cause might be an over-leakage of pressure; check if the hose connection is loose.
What to do if my Viatom Blood Pressure Monitor doesn’t respond when I press the button?
If your device isn't responding to button presses, the battery may be low; try charging it. Alternatively, the product might be running in an unexpected state, in which case you should reset it by pressing and holding the button for 8 seconds. If neither of these steps work, the device might be damaged. Please contact your local distributor.
How to fix Viatom Blood Pressure Monitor when it cannot pair?
If your device won't pair, make sure it's within Bluetooth range (approximately 1.5 meters) during the pairing process. Radio frequency interference, such as from a microwave, can also prevent pairing. Try conducting the pairing process away from potential sources of interference.
What to do if I cannot get ECG measured results on my Viatom Blood Pressure Monitor?
If you cannot get ECG measured results, ensure you are holding the electrode properly and that there is no skin contact between your right and left hand. Also, dry skin can interfere with the reading, so keep the skin of your hand a little moist.
Provides warnings and cautionary advice for safe operation and potential risks associated with the product.
Details the intended use of the blood pressure monitor for measuring blood pressure and ECG in home or healthcare settings.
Lists conditions or environments where the product should not be used, such as ambulatory environments or aircraft.
Identifies the product name and model (BP2, BP2A) and describes its components like the LED screen and start/stop button.
Explains the meaning of various symbols used on the device and in the manual for clear communication.
Instructions on how to charge the device's battery using a USB cable and the expected charging time.
Detailed steps for measuring blood pressure, including applying the cuff and sitting correctly.
Guidance on preparing for and performing an ECG measurement using the device.
Important points to follow before taking an ECG measurement for accurate results.
Step-by-step instructions on how to perform an ECG measurement using different methods.
Instructions for enabling, pairing, and using the Bluetooth feature to transfer data to a phone.
Guidelines for protecting the product from damage and ensuring its longevity through proper storage and handling.
Instructions for cleaning the product and its components, including recommended cleaning agents and methods.
Information on how to properly dispose of batteries and electronic instruments according to regulations.
Provides important warnings and advice regarding the product's interaction with other electronic devices and its environment.
General| Device Type | Blood Pressure Monitor |
|---|---|
| Model | BP2 |
| Measurement Method | Oscillometric |
| Display Type | LCD |
| Connectivity | Bluetooth |
| Cuff Size | 22-42 cm |
| Measurement Range (Pressure) | 0-280 mmHg |
| Accuracy (Pressure) | ±3 mmHg |
| Power Source | 4 x AAA batteries |
| Compatibility | iOS and Android |
| Measurement Range (Pulse) | 40-180 bpm |
| Accuracy (Pulse) | ±5% |
| Memory | Up to 99 measurements |
| Weight | Approx. 300g (without batteries) |
To Next Page
