Viatom BP2 - Measure ECG; Before using ECG; Measurement process

9
3.3 Measure ECG
3.3.1 Before using ECG
 Before using ECG function, pay attention to the following points in order to obtain precise
measurements.
 The ECG electrode must be positioned directly against the skin.

If your skin or hands are dry, moisten them using a damp cloth before taking the measurement.
 If the ECG electrodes are dirty, remove the dirt using a soft cloth or cotton bud dampened with
disinfectant alcohol.

During the measurement, do not touch your body with the hand with which you are taking the
measurement.

Please note that there must be no skin contact between your right and left hand. Otherwise, the
measurement cannot be taken correctly.
 Stay still during the measurement, do not speak and hold the product still. Movements of any
kind will falsify the measurements.
 If possible, take the measurement when sitting and not when standing.
3.3.2 Measurement process
1.Press to power on the product and touch the electrodes to start measuring ECG.

Method A: Lead I, right hand to left hand

Method B: Lead II, right hand to left abdomen
2.Keep touching electrodes gently for 30 seconds.