Viavi HST-3000 Quick Card

HST Ethernet Quick Card
The product comes in Ethernet only or Ethernet/T1/T3 variations and works in conjunction with
a fiber cleaning and inspection kit to help turn-up and maintain Ethernet backhaul links from the
cell site.
When connecting to an optical link first make sure the link is clean using the proper inspection
probes. Then connect the HST-3000 to the line under test using the proper SFP connector into
port 1 on the HST Ethernet SIM.

Viavi HST-3000 Specifications

General

Category	Test Equipment
Model	HST-3000
Manufacturer	Viavi Solutions
Type	Handheld Network Tester
Battery Life	Up to 8 hours
Battery	Rechargeable Lithium-Ion
Humidity	5% to 95% non-condensing
Interfaces	Ethernet, USB, Serial
Applications	Ethernet
Display	Color touchscreen
Operating Temperature	-10°C to 50°C
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Supported Protocols	Ethernet
Measurement Capabilities	Latency, Jitter