Chapter 1 Getting Started
About G.SHDSL testing
2 HST-3000 G.SHDSL Testing User’s Guide
About G.SHDSL testing
The HST-3000’s optional G.SHDSL testing feature enables
users to emulate an STU-R, STU-C, and Ethernet terminal
equipment (TE) to turn up and troubleshoot G.SHDSL circuits,
and the service over the circuit. Using the optional IP suite or
optional on-board web browser, the HST-3000 can also vali-
date a data connection over the network.
The capabilities of the G.SHDSL feature include the following:
– Both remote and central office (exchange) modem emula-
tion
– Ethernet TE emulation to verify service on the premises
LAN
– Various physical line and EOC standards
– User EOC messages
– Network layer and PPP emulation and authentication
– IP layer routing
– ATM loopback
– ATM F5 loopback
– ATM BERT capability
– IP ping
– Web browser
– “In-line” STU-R TE replacement “through” mode
– Supports 2-wire or 4-wire interface
To Next Page
