Chapter 5 xDSL / G.fast Testing
OneExpert DSL User's Guide
22052280, Rev. 016 May 2020142
IPoA Data Mode
If you specified IPoA as Data Mode, do the following:
1. Select whether to do Automatic Login.
2. Select IP mode and then specify the network mode: IPv4, IPv6, or IPv4/IPv6 Dual
Stack. If you selected IPv4, choose Static or DHCP Address Mode.
y If you chose Static, you need to add the IP addresses for:
IPV4 Address
IPV4 Netmask
IPV4 Gateway
IPV4 DNS server
y If you selected DHCP, you need to define:
Use Vendor ID
Use User Class
Use Arp announce
3. Specify the network settings as described in step 6 of "Establishing an Ethernet
connection" on page 55.
Press the Back/Cancel button to return to the main screen.
To Next Page