User’s manual for VC99 3 6/7 DMM
1.SUMMARY
This digital multimeter is a steady performance, battery-driven 3 6/7 digital multimeter.
It uses the LCD with 23mm-high figure to make the reading clear and make operation more
convenient.
The digital multimeter has the function of measuring DCV, ACV, DCA, ACA, resistance,
capacitance, frequency, temperature, duty cycle, transistor and diode, continuity performance
test .The meter can provide functions including analog bar and unit symbol display, data
holding, relative value measuring, maximal/minimal value measuring, auto/manual range
switching (RANGE), auto power off and warning functions .it adopts double integral A/D
converter as its core. It is an ideal tool for labs, factories and radio-technology.
2.SAFTY NOTES：
The instrument is designed according to IEC1010 standard (safety standard issued by
International Electro technical Committee). Please read the following before operation.
1-1.Check the connection and insulation of test leads to avoid electric shock.
1-2.Do not input a limited voltage higher than DC 1000V or AC 750V when measuring ranges.
1-3.When measuring voltage higher than DC 60V, AC 40V, please be careful.
1-4. Select correct function and range to avoid fault operation.
1-5.Please move the test leads away from test points when switching the function.
1-6.Please don’t input voltage value when measuring current.
1-7.Please don’t modify the circuit.
1-8.Introduction for safety symbol:
“ ” exists high voltage; “ ” GND “ ” dual insulation “ ” must refer to
manual “ ” Low battery.
3. SPECIFICATION
1. General features
1-1. Displaying: LCD;
1-2.Max display: 6000(3 6/7) digits automatic polarity, unit symbol and 61 section analog
display;
1-3. Measurement method: double integral A/D conversion;
1-4. Sampling rate: approx.3 times/sec.
1-5. Over-range display: “OL” displayed in the highest digit.
1-6. Low battery display：“ ”
1-7. Working environment: (0～40)℃, relative humidity: <80%;
1-8.Store environment: (-10～40)℃, relative humidity: <80%;
1-9.Power supply：2pcs 1.5V battery（“AAA”7# battery）；
1-10. Dimension: 185×93×35mm (length*width*height);
1-11. Weight: approx..290g（(including battery)；
1-12.Accessories: test leads, user manual, temperature probe, holster, gift box, and 2*1.5V
battery.
2. TECHNICAL FEATURES
2-1. Accuracy: ± (a% × reading data + digits), environment temperature at (23±5) ℃, relative
humidity<75%, One year guarantee since production date.
2-2.DC Voltage（DCV）
To Next Page
Need help?
General
