”
VICON
7c
INSTRUCTIONS FOR
INSTALLATION AND OPERATION
MODEL V390APT WEATHERPROOF HEAVY-DUN PAN-AND-TILT DRIVE
1. INTRODUCTION
The information in this instruction manual covers the
installation, operation, and maintenance of the
V39OAPT Pan-and-Tilt Drives. Throughout this man-
ual, the term V39OAPT and V39OAPT-PP refers to both
models unless stated otherwise.
This unit should be installed by a qualified technician
using approved materials and wiring practices in con-
formance with national, state and local electrical codes.
Model V39OAPT Pan-and-Tilt Drive is a weatherproof,
heavy-duty unit capable of operating with loads up to
80
pounds (36 kg). When mounted in an inverted posi-
tion, it will operate with loads up to 75 pounds
(34 kg).
The heavy-duty motors are constructed with hardened-
steel gears that never require lubrication. All-weather
protection is provided by “0” rings and gasket seals with
Teflon* wear surfaces. Solenoid operated brakes pro-
vide excellent operating stability with minimum coast.
Counterbalanced tilt arms provide smooth, reliable tilt
operation.
CONTROL
PAN/TILT
CONTROL
RELAY BOX
Figure 1
Operating Distances With
and Without Relay Box
PAN/TILT
This 120
VAC
unit may be operated directly by a control
or by a combination of a control and a relay box when
greater operating distances are required. Refer to Figure
1 and Table 1 for maximum operating distances. If a
preset position option is required, use Model V129-8PP
Preset Position Control or the
VPS324TM
or VPS1200
systems.
The V39OAPT is UL listed under Standard 1409.
CAUTION: Mounting the unit outdoors in an
A
inverted position voids the product warranty.
TABLE 1
MAXIMUM OPERATING DISTANCES
Control
Model
V123APT
V113APT
V11306[PT-B
Relay Box
Cable Slze
(AWG)
Annealed
Covver
Maxlmum
Distance
fi
ON*
. .
I
20 630(250)
dl
18
1300(400)
16
2200(670)
14
3400(1000)
22
6000(1600)
V185R
d2*
20 10,000(3000)
18 15,000(4600)
PI
@.L
Vicon part number 8006-8433-02-00
Product specifications subject to change without notice. T”Registered kademark of DuPont DeNemours,
EL
&
Co., Inc.
VICON INDUSTRIES INC. 525 BROAD HOLLOW ROAD, MELVILLE, N.Y. 11747 TEL: (516) 293-2200 FAX: 516-293-2627
*,
‘1
-$,&+
TOLL FREE: l-800-645-9116 (OUTSIDE OF NEW YORK)
To Next Page
General