Viconics VT8650 - Enter Setup Screen

9
028-0441-14_UI-VT8650_A4_EN www.viconics.com May 2020
VT8650 [ User Interface Guide ]
SETUP 2/2
Enter Setup Screen
Touch and hold this point
for 3 seconds to enter setup mode
Note: If a conguration/installer password is
activated to prevent unauthorised access to the
conguration menu parameters, a
password entry prompt shows to prevent
access to device conguration components.
SETUP 1/2
1/2 Setup
Network
Configuration
Setpoints
Display
Service view
Test Outputs
BACnet MS/TP, Modbus, ZigBee and Wi-Fi network settings
(ZigBee network settings appear only if ZigBee feature is
available)
Parameter conguration menu
Setpoint settings
Status display (Read Only)
Display settings
Test outputs settings
2/2 Setup
Clock - Schedule
LUA
Wireless
Language Selection
ADR
Automatic Demand Response
LUA scripting (shows only if LUA script uploaded)
Wireless Ecosystem settings (shows only if ZigBee
feature is available)
Select language
Set clock, schedule and occupancy