www.victor-rodent-control.co.uk
5
Depress the power switch to the “ON” ( l ) position. The green light
will ash once to indicate the trap is working.
6
Once a mouse (mice) is caught, depress the power switch to “OFF” (O)
position. Pull open the rodent receptacle and dispose of rodent(s)
To keep your trap in peak condition - it is important to empty your trap as soon as you see
the kill indicator light ashing. Additionally, cleaning the trap by wiping the metal plates
and drawer with a damp cloth after every 10 kills will improve the life of your trap. Do not
use soaps as the scent could have a repelling eect ***
*** Remove the batteries prior to cleaning your trap. Allow the trap to air dry prior to
reinserting the batteries and turning on the trap.
To Next Page
Loading...
