Victor VC60B+ User Manual

- 2 -
to make measurement.
五、METHOD TO MEASURE THE INSULATED RESISTANCE：
六、SAFETY NOTES:
1、When voltage measurement selection button does not be
pressed, it is possible to appear the high voltage at the
output voltage terminal.
2、When measuring, first check the measurement voltage
selection and if the indication of the measurement
voltage on LCD is in accordance with the voltage
needed
3、To ensure the safety of operation, the operation cannot be
done until the measured object removed from the power
supplied by the electricity grid system, and should be
discharged fully to testify that the measured object does
not have any danger of power.
4、When measuring, it is not allowed to handle the terminal
of measurement to make sure the accuracy of reading
and personal safety.
5、Keep the instrument away from the high temperature
place, and from the direct sunshine to avoid affecting
the life of the LCD.
6、When low battery symbol of “ ” appears, please
replace the batteries in time. Take the batteries out
when storage to avoid the leakage of batteries to
damage the instrument.
7、When unload, reading is normal, it won’t affect the
measurement.
8、When measuring MΩ, if the reading is unstable, it is
likely caused by the interference of surrounding and
unsteadiness of the insulated materials, it will make the
reading stable to connect the “G” terminal to the shield
side of the measured object
9、To ensure the safety of measurement and reduce the
interference, the test leads adopt silicone rubber
materials, please do not change the leads at will.
10、When the external AC adaptor supplies the power, the
inside batteries are disconnected and the batteries can’t
be charged at the time. Note: please select ( )
power supply method.
七、SETS OF INSTRUMENT
1、Digital Insulation Tester 1pc
2、10A test leads 1set
3、5# battery（1.5V）×6 6pcs
4、Operation Manual 1copy
5、Shoulder strap 1pc
八、FAULT ELIMINATION
If the instrument can’t work properly, the below
methods can help you to solve the general problems quickly.
If the fault still can’t be eliminated, please contact the
maintenance centers or distributors.
Fault
Solution
No display
● Power off-please turn on the
power
● Replace the batteries
symbol
appearance
● Replace the batteries
Error value
● Replace the batteries
The instruction manual is subject to change without notice.
The contents in the instruction manual are considered to be
correct, if the user find any errors or pretermissions, etc.,
please contact the manufacturer.
The manufacturer hereby will not be responsible for any
accident and damage caused by the improper operation.
The functions described in this instruction manual do not be
the reason for special usage.
601E-60BX-000A

Victor VC60B+ Specifications

General

Brand	Victor
Model	VC60B+
Category	Measuring Instruments
Language	English