Need help?Do you have a question about the Victor 4000 and is the answer not in the manual?
General| Continuity | Yes |
|---|---|
| Diode Test | Yes |
| hFE Test | Yes |
| Power Supply | 9V battery |
| Measurement Range | As specified in individual characteristics |
| Operating Temperature | 0°C - 40°C |
Crucial safety precautions and usage guidelines to prevent hazards and ensure correct operation.
Explanation of safety symbols used on the instrument and in the manual.
Defines environmental and operational parameters for accurate measurements.
Details general functions, power, display, and physical dimensions.
Lists accuracy and error margins for various measurement ranges.
Instructions for powering the device on and off.
How to freeze and release measurement data on the display.
Operation of the display backlight for low-light conditions.
Procedures for measuring phase relationships between voltages and currents.
Steps to measure AC current and leakage current.
Procedure for measuring AC voltage.
Method to determine if a circuit is inductive or capacitive based on phase.
How to identify the sequence of three-phase voltages.
Special uses and care instructions for the current clamp.
Important notes on preheating, voltage limits, and three-phase system phase relationships.
To Next Page
