Victoria Arduino Black Eagle UA 388 User Manual

60
ENGLISH
STEAM BOILER SETPOINT :
The display shows:
Steam boiler setpoint
1.17
0.86
Steam boiler setpoint
Steam boiler set
poin
1.17
Menu PrincipaleSteam boiler setpoint
Menu PrincipaleSteam boiler setpoint
Steam boiler setpoint
1.17
0.86
Steam boiler setpoint
Steam boiler set
poin
1.17
Select the steam icon and confirm with the
rotary switch.
Turn the rotary switch to select the required
pressure / temperature for the boiler (see the
table on the following page) and then press the
switch to confirm the setting.
BOILER SETPOINT
:
The display shows:
Menu PrincipaleBoiler setpoint
Boiler setpoint
93.493.4
92.0
93.4
92.092.0
Boiler temperature
93.4
Boiler setpoint
93.4
93.4
3
3
Menu PrincipaleBoiler setpoint
Boiler setpoint
93.894.0
93.0
93.8
93.093.2
Boiler temperature
94.0
3
3
Select the coffee boiler to be adjusted and con-
firm by pressing the rotary switch.
Boiler 1 example:
Turn the rotary switch to select the required
temperature for the group; press it to confirm
the setting.
Menu Principale
Boiler Offset
1.0
1.0 1.0
3
3
BOILER OFFSET ADJUSTMENT:
From the screen:
Hold down the washing key
to access
offset and boiler temperature adjustment.
The next screen will be:
Use the rotary switch to select the coffee boiler
for offset adjustment and press it to proceed.
Also use the rotary switch to set the offset value
for the group and then press the switch to con-
firm.
At this point it is possible to adjust the offset of
other groups with the same procedure or select
Menu
or
Home
.
This setting is reserved to qualified service
engineers.
Menu PrincipaleBoiler setpoint
Boiler setpoint
93.493.4
92.0
93.4
92.092.0
Boiler temperature
93.4
Boiler setpoint
93.4
93.4
3
3
Instant
value
Set
value
Instant
value
Set
value

Victoria Arduino Black Eagle UA 388 Specifications

General

Brand	Victoria Arduino
Model	Black Eagle UA 388
Category	Coffee Maker
Language	English