Need help?Do you have a question about the Victoria Arduino Eagle One and is the answer not in the manual?
General| Group Heads | 2 or 3 |
|---|---|
| Voltage | 220-240 V |
| Water Source | Plumbed |
| Type | Espresso Machine |
| Manufacturer | Victoria Arduino |
| Boiler Material | Stainless Steel |
| Pump Type | Rotary |
| Pump Pressure | 9 bar |
| Water Tank Capacity | N/A (plumbed) |
| Frequency | 50/60 Hz |
| Material | Stainless Steel |
| Color Options | Black, White |
| Features | Energy Saving System |
Read all warnings for safe installation, use, and maintenance.
Connect to power mains via disconnect device, follow wiring standards.
Ensure water is suitable for human consumption and compliant with regulations.
Basic rules for using electrical appliances safely, like not touching with wet hands.
Prepare suitable surface, ensure efficient earth system for electrical installation.
Prepare drain, water supply, and understand hazard symbols for safe operation.
Guidelines for safe handling, moving, and storing the machine package.
Verify packaging integrity and check contents against the manual.
Provides manufacturer name, address, and coffee machine model information.
Details technical specifications like groups, voltage, power, and dimensions.
Illustrates and lists the various parts and controls of the machine.
Machine is for professional use by trained personnel for coffee, water, and steam.
Lists foreseeable improper uses to avoid for safe and correct operation.
Instructions for placing the machine on a suitable surface and ensuring proper ventilation.
Guidelines for connecting water, avoiding kinks, and using specified filter maintenance.
Lists required water parameters like hardness, pressure, and purity for optimal function.
Ensure voltage compatibility and follow wiring standards for safe electrical connection.
Details available voltage options and wire color coding for connections.
Steps to activate, run, and test machine circuits after installation.
How to adjust the hot water temperature using a screwdriver.
Describes the automatic boiler filling process and initial water replacement.
Guide to adjusting service pressure for boiler temperature and pump pressure.
Steps to power the machine on and off, including startup diagnostics.
Step-by-step guide to preparing and dispensing coffee using the machine.
Instructions for safe and effective use of the steam wand for frothing milk.
Detailed steps for preparing milk foam for cappuccinos using the steam wand.
Procedure for dispensing hot water and its simultaneous delivery with coffee.
Explains the main menu structure and navigation for programming machine functions.
How to view, add, modify, and delete custom coffee recipes.
Guide to adjusting coffee group and boiler temperatures for optimal brew.
Instructions for programming normal, long, and continuous coffee doses.
How to enable, disable, and set parameters for the prewetting function.
Setting parameters for the EasyCream steam wand, including delay and temperatures.
Process for saving programmed recipes with custom names.
Options for adjusting unit of measure, brightness, screensaver, and date/time.
Helps activate functions for eco-friendly power consumption management.
Enabling/disabling power saving and setting steam boiler pressure in standby.
Setting automatic on/off schedules for each day of the week.
Introduces functions for group washing, automatic purge, and cleaning alarms.
Starting wash programs, setting cycles, and rinse counts for each group.
How to enable/disable purge, set discharge duration, and delay after delivery.
Activating and managing the automatic group cleaning and rinsing cycles.
Adjusting parameters for the steam boiler and the cup warmer.
Viewing dose counts for groups, partial, absolute, and maintenance.
Details on counting delivered doses per group and partial counts.
Viewing total machine counts and maintenance cycle counts.
How to enter technical settings using a password and available functions.
Accessing Offset, Alarms, Smartwater, and Diagnostics within maintenance.
Understanding and setting temperature and pressure offsets for calibration.
Accessing alarm logs and managing maintenance alarms.
Modifying maintenance alarm triggers, pressure alarms, and cycle counts.
Setting acceptable PH and TDS ranges for the smart water system.
Using the diagnostics tool to check component functioning and test parts.
Accessing and configuring date/time, optional settings, info, CPU, and passwords.
Setting machine control unit parameters like groups, probes, buttons, and autorefill.
Setting user and technician passwords, managing privileges, and default password.
Instructions for cleaning the external parts and work area of the machine.
Weekly procedure for cleaning coffee-holders, ensuring unobstructed holes.
Using the automatic cleaning cycle with blind filter and powder detergent.
Soaking filters and filter-holders to remove coffee residue and cleaning them.
Steps to regenerate ionic resins for softener efficiency and prevent scale.
Ensuring component compliance with hygiene/safety and using original parts.
Lists common messages, causes, effects, and solutions for machine issues.
Wiring diagram for the 2-group Eagle One machine.
Wiring diagram for the 3-group Eagle One machine with component list.
Diagram illustrating the water supply system and its components.
Diagram and part list for the boiler assembly of the 2-group machine.
Diagram and part list for the boiler assembly of the 3-group machine.
To Next Page
