Automatic wash. Cycle
Menu Principale
1.20 bar
W
°C °C °C
21 MarchSunday 14:45
Menu
Once the washing has been finished, the rinse
stage is requested automatically:
The washing button
will start to flash;
press it and the machine will display:
Menu Principale
1.20 bar
°C °C °C
21 MarchSunday 14:45
Menu
R
In this case, the screen will display (E.g. Wash
group 1 only):
Empty the blind filter of any Pulicaff residues
and re-insert the filter holder into the group.
Press the rotary switch on the group to be
rinsed, then select
Home
the screen will
show:
NOTE: During the selected group wash cycle, it
is possible to deliver coffee from the
groups that have not been selected.
Insert new password
Menu Principale
PASSWORD SETTINGS :
This page is used to enter the login password,
when it is required and enabled.The password
may consist of 4 numbers from 0 to 9 in any
combination.
Impostazioni tecniche
Date and time Information
Automatic
wash. Cycle
Update
firmware
Maintenance
Menu PrincipaleTechnical settings
Setting
password
The password length may be included between
0 (password disabled or invalid, characterized
by h orizontal lines) and 4 digits; therefore, even
a password of 2 digits is valid.
Once having entered and confirmed the pas-
sword, an information page will show the result
of the comparison between the entered pas-
sword and the one previously set.
To enter the pages inside the various menus,
when the password is unknown, the passe-par-
tout password may be used. The value of this
password is 1 9 0 5.
Change of password
This page, which is contained in the technical
settings menu, permits to change the password.
It is necessary to first confirm the password set
(for safety reasons), if the password manage-
ment is enabled.
Once having entered and confirmed the pas-
sword, an information page will show the result
of the comparison between the entered pas-
sword and the one previously set.
Insert old password
Menu Principale
Subsequently, the new password to be set will
be requested.