EasyManuals Logo
Home>Victoria Arduino>Coffee Maker>EAGLE TEMPO

Victoria Arduino EAGLE TEMPO User Manual

Victoria Arduino EAGLE TEMPO
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
38
FR
FR
Avant de commencer à travailler, l’opé-
rateur doit avoir lu et compris toutes les
prescriptions de sécurité indiquées
dans ce manuel.
6.1
ALLUMAGE ET
REMPLISSAGE CHAUDIÈRE
Après avoir effectué les opérations décrites
aux chapitres 4 et 5, pour allumer la machine,
appuyez sur le bouton d'alimentation situé en
bas à droite sur la position 'I'.
L'écran affichera la page de bienvenue avec le
logo EAGLE TEMPO pour 10 seconds.
Lorsque la machine est sous tension, appuyer
sur la touche de mise en marche pendant 4
secondes pour faire fonctionner la machine.
Si l’auto-diagnostic indique des anomalies ou
des défauts, l’opérateur NE DOIT PAS interve-
nir; contacter le centre d’assistance.
En cas de manipulation de la carte électro-
nique, éteindre la machine à l’aide de l’inter-
rupteur général et débrancher le câble d’ali-
mentation.
EN
EN
Before starting to use the appliance,
the operator must be sure to have read
and understood the safety prescrip-
tions contained in this booklet.
6.1
SWITCH ON AND
FILLING THE BOILER
After performing the operations described in
chapters 4 and 5, to switch the machine ON,
press the power button located at the bottom
on the right-hand side to the 'I' position.
The display will show the welcome page with
the EAGLE TEMPO for 10 seconds.
With the machine in power, keep the switch-
ing on button pressed for 4 seconds to let the
machine start.
If the self-diagnostics reports anomalies or
failures, the operator MUST NOT intervene.
Please contact the Service Centre.
For electronic card maintenance, turn the
machine off by means of the external main
switch or disconnect the plug.
IT
IT
L’operatore deve prima di iniziare la la-
vorazione, accertarsi di aver letto e ben
compreso le prescrizioni di sicurezza di
questo manuale.
6.1
ACCENSIONE E
RIEMPIMENTO CALDAIA
Dopo aver eseguito le operazioni descritte
nei capitoli 4 e 5, per accendere la macchina
premere il pulsante di accensione posto nella
parte inferiore sul lato destro in posizione "I".
Il display mostrerà la schermata di benvenuto
con il logo EAGLE TEMPO per 10 secondi.
Con la macchina in potenza, mantenere pre-
muto il tasto accensione per 4 secondi per
rendere operativa la macchina.
Nel caso in cui l’autodiagnosi indichi anoma-
lie o guasti, l’operatore NON DEVE intervenire;
contattare il Centro di Assistenza.
In caso di manutenzione alla scheda elettro-
nica, spegnere la macchina tramite l’interrut-
tore generale esterno o scollegare il cavo di
alimentazione.
6
UTILIZZO
USE
UTILISATION
4’

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Victoria Arduino EAGLE TEMPO and is the answer not in the manual?

Victoria Arduino EAGLE TEMPO Specifications

General IconGeneral
BrandVictoria Arduino
ModelEAGLE TEMPO
CategoryCoffee Maker
LanguageEnglish

Related product manuals