6.1 .3 SERVICING INTERVALS
The period recommended is based on normal
operating conditions. Severe or unusual cond-
tions may require more frequent lubrication or oil
changes.
Hours or Daily
1. Grease PTO driveline.
40 Hours or Weekly
1. Grease the telescoping section of
the PTO shaft.
WARNING
Machine is shown with guard re-
moved or rotor cover opened for
illustrative purposes only. Do not
operate machine with guard
removed or cover opened.
Fig. 38 PTO driveline
Fig. 39 TELESCOPING SECTION
2. Check input drive belt tensioner.
Fig. 40 BELT TENSION
To Next Page
