Victory BX42S - Hydraulic Fitting Torque

7.3 HYDRAULIC FITTING TORQUE
Tightening Flare Type Tube Fittings
*
1. Check flare and flare seat for defects that might cause leakage.
2. Align tube with fitting before tighten- ing.
3. Lubricate connection and hand tighten swivel nut until snug.
4. To prevent twisting the tube(s), use two wrenches. Place one wrench on the connector body
and with the second tighten the swivel nut to the torque shown.
5. The torque values shown are based on lubricated connections as in reass.
Tube
Nut Size
Torque
Recommended
Size
Across
Value•
Turns To Tighten
OD
Flats
(After Finger
Tightening)
(in.)
(in.)
(N.m)
(lb-ft)
(Flats)
(Turn)
3/16
7/16
8
6
1
1/6
1/4
9/16
12
9
1
1/6
5/16
5/8
16
12
1
1/6
3/
/ 6
24
/6
1/2
7/8
46
34
1
1/6
5/8
1
62
46
1
1/6
3/4
1-1/4
102
75
3/4
1/8
7/8
1-3/8
122
90
3/4
1/8