INSTALL THE DARTBOARD MOUNTING BRACKET INTO CABINET
Install Mounting Bracket
Step.1
1. Align 2 holes on the H1 Mounting Bracket with the 2 backboard center holes.
2. Using 2 pcs H2 Screw and H3 Washer, insert from the cabinet backside and go through the 2 backboard center holes.
3. Install 2 pcs H4 Nut onto 2 pcs H2 screws, tighten using plyers & phillips driver.
Refer to Figure 1 & Figure 1.1.
- 5 -
*NOTE: Cabinet doors not shown for clarity.
NOTE: H1 Mounting Plate
must be orientated slot up
H2
H3
H2
H3
H4
H4
H1
Figure 1
Figure 1.1
Backboard center holes
Mount Dartboard Cabinet onto Wall
Step.2
Important Safety Information:
Install and use this dartboard cabinet with care. Please read the entire manual and all instructions before attempting
installation and carefully follow all instructions contained herein. Use proper safety equipment during installation which
includes ANSI-Approved safety glasses and heavy duty work gloves.
Note: FAILURE TO READ AND FOLLOW THESE INSTRUCTIONS WILL VOID THE WARRANTY.
Please call a qualified installation contractor for help if you:
A. Don’t understand the instructions in this manual or have any doubts about the safety of this installation .
B. You are uncertain about the nature of your wall .
C. You decide to hang the dart cabinet in a manner that does not utilize the “WOOD STUD MOUNTING INSTRUCTIONS
BELOW “.
Do not use this product for any purpose or in any configuration not explicitly specified in these instructions.
Escalade Sports hereby disclaims any and all liability for injury or damage arising from incorrect assembly, incorrect
mounting or any incorrect use of this product.
Note: The mounting hardware supplied with this product is NOT designed for installation to walls with steel or aluminum
studs, cinder block walls, brick, stone, hollow walls, gypsum board, drywall and or similar materials. If the hardware for your
installation is not included , please consult your local hardware store for the proper mounting hardware for this product as
per your application.
Note: As a convenience to our Valued Customers , we have designed this Dart Cabinet Mounting Instruction to be able to
be performed by one adult.
NOTE: Holes with Keyhole
shape is cabinet upside
Backside of
cabinet