Need help?Do you have a question about the Victron energy Orion-Tr Smart 12/24-15 and is the answer not in the manual?
General| Output Current | 15 A |
|---|---|
| Efficiency | up to 95% |
| DC Connection | Screw terminals |
| Remote On-Off | Yes |
| Programmable | Yes |
| Bluetooth | Yes |
| Output Voltage | 12 V / 24 V |
| Protection | Output short circuit, Over temperature |
| Communication | Bluetooth |
Explains compatibility with smart alternators that have variable output voltage and are shut down when not needed.
Describes how the charger separates the starter battery from the service battery when the engine is not running.
Lists protections like over-temperature, overload, short circuit, and connector over-temperature.
Details the three-step charging process: Bulk, Absorption, and Float, for efficient battery charging.
Highlights programmable charge algorithms and pre-programmed battery settings configurable via VictronConnect.
Explains automatic calculation of proper absorption time, configurable with Victron Connect.
Describes Bluetooth Smart connectivity for setup, monitoring, and updating using smartphones and tablets.
Details shutdown when input voltage drops below a set value and restart when it rises above the restart value.
Explains remote enable/disable via connector or VictronConnect app for various use cases.
Essential safety guidelines for installation, operation, environment, ventilation, battery compatibility, and preventing sparks.
General mounting instructions for vertical placement, non-flammable surfaces, and clearance for optimal cooling.
Step-by-step guide for connecting the unit in power supply mode, including app setup and load connection.
Step-by-step guide for connecting the unit in charger mode, emphasizing app setup before battery connection.
Details recommended methods for remote on-off connections using switches or an isolated cable for control.
Explains how to force charging independent of engine detection using the remote L-pin for external control.
Provides guidance on input/output cable lengths, external battery protection fuses, and minimum cable gauge.
Specifies the recommended torque value (1.6Nm) for connecting terminals.
Explains the states of the green LED (off, on, blinking) and their corresponding meanings for product status.
Describes the states of the blue LED (off, blinking, on) indicating Bluetooth status, errors, and identification.
To Next Page