Need help?Do you have a question about the Victron energy SKYLLA-TG 24/30 and is the answer not in the manual?
General| Input Voltage Range | 180 - 265 VAC |
|---|---|
| Output Voltage | 24 VDC |
| Output Current | 30 A |
| Weight | 2.5 kg |
| Battery Type | Gel, AGM |
| Protection | Overvoltage, short circuit, over temperature, reverse polarity |
| Charging Algorithm | Adaptive |
| Operating Temperature Range | -20°C to +50°C |
Safety precautions and warnings related to the battery charger's operation and handling.
Overview of the Skylla-TG charger, its features, and charging characteristics.
Information on battery types and recommended capacities for the Skylla-TG charger.
Details on the internal electronic protective devices of the battery charger.
Guide on how to properly install the Skylla-TG battery charger, including connections.
Instructions on how to operate the Skylla-TG charger, including startup and charging modes.
Recommendations for maintaining the Skylla-TG charger to ensure optimal performance.
Steps to open the charger cabinet and access initial settings and options.
Procedure for adjusting boost/float voltages and equalize mode duration.
Diode-splitter compensation and traction battery adjustments.
How to connect and use a temperature sensor to adjust charging voltage.
Implementing voltage sensing and configuring intelligent startup features.
Information on connecting optional remote panels for monitoring and control.
Procedure for connecting a voltmeter and an ampèremeter for monitoring.
General specifications including switch behavior, temperature range, and certifications.
Technical details related to the charger's input voltage and frequency.
Detailed specifications of the charger's output characteristics, voltage, and current.
Mechanical specifications of the charger, including dimensions, weight, and protection.
To Next Page