EN
20
Effect: Normal/Sepia/B&W/Negative
Change the color of the picture taken.
System Setting
Car Mode: Off/On
With this setting turned on, the camera can be used as a dashcam. At
this time, the looping video in the video settings is automatically set to
3 minutes (You could adjust to other interval manually). And the
camera will start recording automatically after power on.
Power Off: Off/1Min/5Min
After setting a period of time, if there is no operation on the camera,
the camera will automatically shut down.
Date & Time: ___Y___M___D 00:00:00
Use the UP/Down Button to change the value, use the Shutter/OK
Button to turn to next item.
Tips: Since the camera does not have a built-in battery, once the
battery is removed or the camera is out of power while shooting, the
camera's time will be reset to 2018/01/01 when it powered on at next
time, and then you need to reset the time in the setting.
Stamp: Off/On
Timestamps on photos and videos.
Upside Down: Off/On
When this setting is turned on, the camera's screen flips up and down.
To Next Page
Loading...
