Rev AA Fluid Safety Guidelines 2-5
Videojet 1710 Operator Manual
PERSONAL INJURY. The Optional Wash Station has been solely
designed for the cleaning of the printhead.
Do not use it for purging or printing operations or for any other
purposes.
Always ensure that the jet is stopped and that any hazardous
voltages are switched off prior to the commencement of the
printhead wash down.
EQUIPMENT DAMAGE. Always empty the service trays
frequently. Some inks and cleaning solutions are flammable. Make
sure that the waste fluids are disposed according to HAZMAT.
Fuses
PERSONAL INJURY. To ensure continued protection against fire
hazards, replace fuses only with the specified type and rating.
Fluid Safety Guidelines
This section describes the hazards that may occur while handling ink,
make-up fluid, and cleaning solutions, and the safety precautions that a
user must take to prevent the hazards.
Read the Material Safety Data Sheets
Read and understand the Material Safety Data Sheet (MSDS) before using
any ink, make-up fluid, or cleaning solution. An MSDS exists for each type
of ink, make-up fluid, and cleaning solution. For more information, visit
www.videojet.com and navigate to Documentation > Material Safety Data
Sheets.
To Next Page
Loading...