Rev AA Introduction 4-1
4
Printer Operation
Introduction
This chapter provides the procedures to do the following tasks:
• Turn on the printer
• Clean start and stop the printer
• Turn off the printer
• Create a message
• Print the messages
• System menu
• Calibrate menu
• Data logging menu
• Product counter
• Run hours
• Configure serial port
• Configure ethernet
• High speed remote data transfer
• Enter service information
• Printer configuration
• Ink Addition
• Create custom font
How to Turn on the Printer
Do the following tasks to turn on the printer:
1 Do the visual inspection.
2 Make sure that the electrical supply for the printer is available.
3 Press the on/standby switch to turn on the printer.
To Next Page