Moving
To Move ... Press ...
Up/Down/Left/Right [Arrow Keys]
To Any Position in a Numeric Field [CHG], then [SHIFT]+[left/right arrow]
To Top/Bottom of EDL [GO TO]+[Up/Down Arrow]
To Previous/Next Scene or Source [SHIFT]+[Up/Down Arrow]
To Previous/Next Stop [GO TO]+[SHIFT]+[Up/Down Arrow]
To Specific EDL Event [GO TO]+[OK], press [CHG], enter EDL number,
then press [OK]
To In/Out Time on Video [GO TO]+[IN/OUT]
MX-1 Related Functions
To ... Press ...
Change MX1 Current Output Press [A/B/C/D]or [COLOR]
Change MX1 Next Output [GO TO]+ [A/B/C/D]or [COLOR]
Toggle MX1 Preview Display between [SHIFT]+[CHANGE]
next, current and preview.
Freeze Mixer Output (cannot be saved [SHIFT]+[GPI-M]
in EDL)
Rearrange/Renumber EDL Events
To ... Press ...
Move an Event [CUT], display new location, [PASTE]
Copy an Event [COPY], display new location, [PASTE]
Move a Group of Events [SHIFT]+[CUT], display new location, [PASTE]
Copy a Group of Events [SHIFT]+[COPY], display new location, [PASTE]
Renumber Events [GO TO]+[SHIFT]+[CHG]
Reference by Key:
Power Key
[POWER] turns power to the unit on and off. When turned on, Edit Suite runs
through a start-up routine then redisplays the event that was current when
Edit Suite was turned off, or the Demo screens (if they have not been turned off
via the SETUP/DEMO function).
To Next Page
Loading...