Changing MX1 Event Fields
To change the MX1 Event fields:
002/003 FX=001 DI=>
MX1 SP=5 BG=0 BC=
• Move the cursor to the FX (transition number) field. Press [CHG] to
activate the numeric keys, then enter the three-digit transition number.
Any of the MX-1's 240 transitions (000-239) may be used.
• Move the cursor to the DI (transition direction) field. If you want to
change the direction for the transition, press [CHG].
• Move the cursor to the SP (speed) field. To change the value, press [CHG]
to activate the numeric keys, then use the numeric keys or the jog/shuttle
to change the value. If you use the jog/shuttle, complete your entry by
pressing [OK].
• Move the cursor to the BG (background color) field. To change the value,
press [CHG] to activate the numeric keys, then use the numeric keys or
the jog/shuttle to change the value.
• Move the cursor to the BC (border color) field. To change the value, press
[CHG] to activate the numeric keys, then use the numeric keys or the
jog/shuttle to change the value.
To specify that a border color will not be used, press [CHG], then press
[DELETE].
To Next Page
Loading...