Ways to Create a Split Insert Event
There are two ways to create a Split Insert Event:
1. The NEW Menu
• Display the NEW menu, select SPLT, then press [OK]. Edit Suite will
create a SPLT Event with a split type of video delay and a blank duration.
002 VIDEO DELAY
SPLT : : .
2. The SPLIT Key
• Press [SHIFT]+[SPLIT]. If the active event (the event displayed in the
LCD) is an Insert Event, a SPLT Event is created. If the active event is not
an Insert Event, Edit Suite will beep twice and ignore the command.
Changing the SPLT Field Values
To change the SPLT field values:
002 VIDEO DELAY
SPLT 00:00:03.00
• Move to the Delay Type field and press [CHG] to cycle between the two
choices: VIDEO DELAY and AUDIO DELAY. If you want the audio to
start first, select VIDEO DELAY.
• Move to the time code field, press [CHG] to activate the numeric keys,
then enter the amount of delay.
To Next Page
Loading...