RETRY and TOLERANCE should not be modified. Leave them set to 03.
This table summarizes the initial settings to use for VCRs and Camcorders with LANC, PANA, RS-232
and RS-422 protocol. Refer to Appendix A for more information about the VCR Definition Parameters
and the VCR tables to use.
VCR Configuration Parameters
Parameter Initial Values for Each Protocol Type (Except IR &
Name None)
PROTO LANC* PANA 232 422
(protocol)
VCR (VCR table 001 - VCRs 001 001 - Sony 001
number)
002 - 003 - Panasonic
Camcorders
004 - JVC
007 - CCD-
V5000
012 - Canon
PREROLL 05 05 05 05
TCSRC (Time Code INT (for real INT (for real INT INT
Source) time counter or time counter )
RCTC)
EXT (for
EXT (for VITC or LTC )
VITC or LTC)
TC (Time Code Type) NONE
NONE NONE
NONE
[Use NONE if Real RCTC
VITC RCTC
VITC
Time Counter is to be
used.]
VITC
LTC VITC
LTC
LTC
LTC
INS ( VCRR Only) Is record deck capable of Insert Edits? 0 = No, 1 = Yes.
SPLT (VCRR Only) Is record deck capable of Split Insert Edits? 0 = No, 1 = Yes.
To Next Page
Loading...