5
INDUCTION LOOP GUIDE
Induction Loop Guide EN-UK - V.1.1 - 19/10/16
TECHNICAL SPECIFICATION
It is important that the Induction Loop module (both the 4846/IND and VR4KIND) is powered by a
separate12Vdc (3A) power supply.
Supply Voltage: 12V-14Vdc.
Quiescent Current: 50mA.
Operating Current: 2A (minimum).
LED1: Power indication LED shows the device is powered ON.
LED2: Active LED shows the device is operating correctly.
LED3: Overdrive LED indicates the audio signal of the device.
VR4KIND
1. Fit VR4KIND module as shown in Fig.B.
2. Use the M3x6 xing screws to x the frame mounting brackets as shown in Fig.B.
1.
2.
M3x6 xing screws
Fig.B
To Next Page
Loading...
