Videx 4833 User Manual

66251090-EN - V2.1 - 15/05/16
1
4000 Series
Art.4833 - Installation instructions
Art.4833 Speaker unit
Fig. 1
sw
NONCCPTESLBSV1V221 12Vout - +V
J1 J2 J3 J4
1 2 3 4
ON
DATA
H
L
R02A
Fig. 2
DESCRIPTION
Speaker unit module Art.4833 comprising of high quality auto iris lens CCD Day/Night colour camera with infrared illumination LEDs.
LEDS
When illuminated, indicates that it is not possible to make a call because a call or a conversation is in progress (from
the outdoor station from which you are calling or from another outdoor station on systems with multiple entrances).
The LED will be o when the system is in stand-by.
If illuminated, indicates that the call from the outdoor station is in progress. The LED will switch OFF when the call is
answered or after the programmed number of rings.
If illuminated, indicates that it is possible to speak because the call has been answered. The LED will switch OFF at
the end of a conversation (or at the end of the conversation time).
If illuminated, indicates that the door lock has been operated. It will switch OFF at the end of the programmed “door
opening” time.
CONTROLS SPEAKER & MICROPHONE VOLUME
Trimmer to adjust the speaker volume. Rotate clockwise to increase or anticlockwise to decrease.
Trimmer to adjust the microphone volume. Rotate clockwise to increase or anticlockwise to decrease.

Videx 4833 Specifications

General

Brand	Videx
Model	4833
Category	Speakers
Language	English

Summary

Product Description

LED Indicators

Describes the function and status of the unit's LEDs for call and conversation.

Controls and Volume Adjustment

Details the physical controls for speaker and microphone volume adjustment.

System Settings and Configuration

DIP Switch Settings

Explains the configuration of the 4-way DIP switch for unit address and other functions.

Jumper Settings

Details the function of jumpers J1, J2, J3, and J4 for various operating modes.

Built-in Relay Protection

Covers back EMF protection for built-in relays, selectable via jumper J4.

Lock Release Protection

Explains the use of varistors and diodes for back EMF suppression on lock releases.

Signal Definitions

Signal Terminals

Lists and defines all signal terminals (+V, 12Vout, 1, 2, V1, V2, BS, SL, PTE, C, NC, NO).

Technical Specifications

Power and Environment

Provides details on power supply, consumption, and operating temperature range.

Company Information and Support

Company Offices

Lists contact details for Videx offices in Italy, UK, Greece, Denmark, and Benelux.

Customer Support

Provides customer support contact information for all countries and UK customers.

Certifications

Details CE marking and relevant European directives for product conformity.