Videx 4836 - Induction Loop Pack; Mounting to 4 K Series Front Support Frame; 4846;Ind

4
INDUCTION LOOP GUIDE
Induction Loop Guide EN-UK - V.1.1 - 19/10/16
INDUCTION LOOP PACK
The Induction Loop pack should contain the following parts:
• 12Vdc power cable.
• Red/Blue 4mm male bullet connector Induction Loop cable.
• Red/Blue 4mm female bullet connector Speaker cable.
• 2x Scotchlok™ 3 way butt connector.
MOUNTING TO 4K SERIES FRONT SUPPORT FRAME
1. Remove thin lm from adhesive gasket and t as shown in Fig.A.
2. Clip Art.4846/IND induction loop module into front support frame as shown in Fig.A.
1.
2.
Art.4846/IND
Fig.A