Need help?Do you have a question about the Viessmann Dekamatik-HK1 and is the answer not in the manual?
General| Brand | Viessmann |
|---|---|
| Model | Dekamatik-HK1 |
| Category | Control Unit |
| Language | English |
Overview of safety, installation, and warranty guidelines for proper product use and compliance.
Definitions of hazard symbols (DANGER, WARNING, CAUTION, IMPORTANT) and their meanings.
Details on product approvals and compliance with national electrical codes for installation.
Requirement for licensed professionals to perform installation, adjustment, service, and maintenance.
Guidelines for installing the power supply, including disconnect switches and overcurrent protection.
Instructions on leaving all applicable literature at the installation site for the owner.
Illustrates a heating system with one heating circuit and a mixing valve, detailing component connections.
Illustrates a system with an underfloor heating circuit and a mixing valve, detailing component connections.
Step-by-step guide for mounting the Dekamatik-HK1 unit directly onto a mixing valve.
Instructions for installing the Dekamatik-HK1 unit on a wall using a mounting fixture.
Diagram and explanation of the main terminal connections and components of the Dekamatik-HK1.
Procedure for mounting and connecting the supply temperature sensor (strap-on type).
Guidance on mounting and connecting the outdoor temperature sensor, including placement recommendations.
Steps for connecting a room temperature sensor as an alternative to the outdoor sensor.
Instructions for using the programming unit as a remote control within the wall mounting fixture.
Procedure for connecting WS/RS remote control units to the Dekamatik-HK1.
Instructions for connecting a 115 V heating circuit pump, including safety warnings for underfloor heating.
Details on connecting high current or 3-phase heating circuit pumps, including contactor requirements.
How to connect external signals for heat demand or heat disable functions.
Wiring instructions for connecting a mixing valve motor for wall-mounted units.
Procedure for connecting a device to indicate compiled faults or sensor errors.
Information on the standard 120 V power supply and required receptacle with circuit breaker/fuse.
A checklist to ensure all installation steps and connections are correctly completed before operation.
Advice on keeping operating and service documents organized in a binder for future reference.
Physical dimensions of the unit for different mounting types and key technical specifications.
A blank section for user notes and observations.
To Next Page