Viessmann GC1 Technical Data Manual

2
5604 122 v1.0
Vitotronic 100, KW10B Technical Data
Product Information
The benefits at a glance:
digital boiler control
space heating circuit controlled by room thermostat
and outdoor reset logic
single-stage or two-stage boiler control
(depending on burner)
integrated diagnostic system
built-in boiler low temperature protection
short assembly time and start-up due to diagnostic
and wire terminals
digital boiler control:
- for single-boiler systems
- outdoor reset control
- for heating circuits without mixing valves
- for single-stage or two-stage burner
- with analog temperature display
- with integrated diagnostic system
Standard equipment:
Vitotronic 100, Model KW10B with;
adjustable fixed high limit
power supply cord
outdoor temperature sensor
boiler temperature sensor
DHW temperature sensor
120VAC boiler pump and DHW pump outputs
In conjunction with the following Viessmann boiler
Boiler Model and Series
Fuel Minimum boiler water temperature
without low limit with low limit (average temp.)
Oil-fired hot water
heating boiler with
power burner
Vitorond 100 Oil 104º F (40º C)
Oil-/Gas-fired hot water
heating boiler with
power burner
Vitola 200 Oil/Gas
x
Atmospheric gas-/
propane-fired hot water
heating boiler
Vitogas 050, RS Series (single-/
two-stage)
Gas 120º F (49º C)
Atmospheric gas-fired
hot water heating boiler
Vitogas 100, GS1 Series,
up to 240 MBH/70 kW
Vitogas 100, GS10 Series,
up to 380 MBH/111 kW
Gas
Gas
104º F (40º C)
120º F (49º C)
Application

Viessmann GC1 Specifications

General

Brand	Viessmann
Model	GC1
Category	Control Unit
Language	English