Viessmann SDIO User Manual

18
28 Cyclical pause time
Display Value Explanations
After the set cyclical heating time for the DHW cylin-
der without priority has expired (parameter "27"), the
rise in collector temperature is captured during the cy-
clical pause time.
3 min 28:3
... min 28:1 to
28:60
Configuring the SDIO/SM1A electronics module for PlusBus
If using the SDIO/SM1A electronics module in conjunction with PlusBus (plug
jF
), the parameters are listed in
the installation and service instructions for the heat generator.
Heat generator installation and service instructions
Commissioning
Configuring the SDIO/SM1A electronics module (cont.)
6131981
Commissioning

Viessmann SDIO Specifications

General

Brand	Viessmann
Model	SDIO
Category	Control Unit
Language	English