20
The following information can be checked:
■
Annual consumption: Power consumption as calcula-
ted by the control unit. The actual power consump-
tion may vary.
■
Proportion of DHW heating provided by the immer-
sion heater and the heat pump in the last 30 days
Example:
Fig. 22
Display Meaning
"142" "kWh / 30
days"
The appliance consumed 142 kWh
in the last 30 days.
"HR:22" % Time percentage of DHW heating
provided by the immersion heater in
the last 30 days: 22 %
"HP:78" % Time percentage of DHW heating
provided by the heat pump in the
last 30 days: 78 %
Displaying information
1. Use to select information .
2. Use OK to switch between displays.
Note
To reset the values, press and OK simultane-
ously.
3. Return to the last operating program with .
Checking messages
Messages are shown if your DHW heat pump experi-
ences particular events or operating conditions.
If faults occur, notify your contractor. Tell your contrac-
tor which fault message is being displayed ("ER 0" to
"ER 10"). This enables the contractor to be better pre-
pared and may save you unnecessary travelling costs.
Checks
Checking information
5593131
To Next Page