Vitocrossal 300 CU3A 26 to 57 Operating
5673 650 - 01
28
Additional Adjustments
Setting the Primary Heating Circuit for the Standard Menu
The time and date are factory-set. If your heating system
has been without power for a long time, it may be
necessary to set the time and date.
Extended menu:
1.
2. “Settings”
3. “Time/Date”
4. Set the time and date.
Setting the Time and Date
Language Selection
Extended menu:
1.
2. “Settings”
3. “Language”
4. Select the required language with
5. Accept by pressing OK.
If your heating system has several heating circuits,
you can select the heating circuit to be displayed in
the standard menu.
Extended menu
1.
2. “Settings”
3. “Standard menu”
4. Select the heating circuit:
- “Heating circuit 1” (for heating circuit 1)
“HC1” is displayed
- “Heating circuit 2” (for heating circuit 2)
“HC2” is displayed
- “Heating circuit 3” (for heating circuit 3)
“HC3” is displayed
To Next Page
Loading...
Need help?
General
