5
Product information
The Vitogate 200 type EIB gateway is
designed to hook up Vitotronic control
units with integral LON communication
module (accessory) to KNX/EIB sys-
tems.
The Vitogate 200, type EIB must be inte-
grated into the KNX/EIB system by an
authorised specialist.
Application
Communication is possible with the fol-
lowing Vitotronic control units:
Wall mounted gas boilers:
■ Vitotronic 100, type HC1
■ Vitotronic100, type HC2
■ Vitotronic 200, type HO1
■ Vitotronic 300-K, type MW2
Vitotronic 333, type MW2
Oil condensing boiler:
■ Vitotronic 200, type KW6
Medium and industrial/commercial boiler
systems:
■ Vitotronic 200-H, type HK1M
Vitotronic 050, type HK1M
■ Vitotronic 200-H, type HK1S, HK3S
Vitotronic 050, type HK1S, HK3S
■ Vitotronic 200-H, type HK1W, HK3W
Vitotronic 050, type HK1W, HK3W
■ Vitotronic 100, type GC1
■ Vitotronic 200, type GW1
■ Vitotronic 300, type GW2
■ Vitotronic 300-K, type MW1, MW1S
Vitotronic 333, type MW1, MW1S
Functions
The Vitogate 200, type EIB enables sys-
tem users to utilise the following func-
tions in conjunction with an EIB system:
■ Transfer of the operating states of the
heating system
■ Setting heating system parameters
■ Transfer of fault and error messages
■ Control of the flow temperature subject
to heat demand and in conjunction
with the Viessmann EIB module and
constant EIB control of individual room
temperature
Preparing for installation
Preparing for installation
5592 880 GB
Installation
To Next Page
Loading...
