Sicherheitshinweise/Zuerst informieren
VITOTROL 200
2
Safety Instructions
Safety and Installation Requirements
Please ensure that these instructions are read and understood before commencing installation. Failure to comply with the
instructions listed below can cause product/property damage, severe personal injury, and/or loss of life.
Working on the equipment
The installation, adjustment, service,
and maintenance of this product must
be done by a licensed professional
heating contractor who is qualified and
experienced in the installation, service,
and maintenance of hot water boilers.
There are no user serviceable parts on
the boiler, burner, or control.
Ensure main power supply to
equipment, the heating system, and all
external controls has been deactivated.
Close main oil or gas supply valve.
Take precautions in both instances to
avoid accidental activation of power
during service work.
Ensure that the installation
literature of other
components is referred t o.
Overview of Operating and Display Elements
With the Vitotrol Remote Control you can adjust
H “normal room temperature“
H the operating mode
H party and economy mode
right from your living area.
Adjustments of
H timer cycles
H “reduced room temperature”
H domestic hot water temperature
H heating curves
H time and date
H holiday program
must be made at the Vitotronic control
unit.
See Operating Instructions of
heating system with Vitotronic control.
Setpoint selector for “normal room
temperature”
Operating mode selector buttons
Economy mode
Fault indicator (red)
Party mode
5167 501
To Next Page
Loading...
